How to use the power strip correctly?

1. The socket and plug should be replaced in time when they are abnormal or aging.

2. Do not use the power lead directly in the socket.

3. Never change the size and shape of the plug. This will cause poor contact between the plug and the socket, damage to household appliances, plugs and sockets, and even cause fire.

4. Don't pull the power cord when pulling out the plug, it is easy to pull the part where the power cord is connected with the plug, which will cause short circuit, leakage, and cause fire and electric shock accidents.

5. You must buy the new national standard socket, do not buy the universal socket that is prohibited by the country. The three-phase socket of the new national standard socket is separated from the two-phase socket and has 5 holes; the three-phase socket and the two-phase socket of the universal socket are combined, and there are 3 holes.

6. Avoid "small horse-drawn carts." The power strip has a rated current and cannot be overloaded, otherwise the socket will heat up, damage the electrical appliances and even cause a fire. Pay special attention not to plug high-power household appliances such as air conditioners and microwave ovens into sockets with small rated current values.